Toyota Prius (2014) Owner Manual

The recommended maintenance schedule for the 2014 Toyota Prius includes an oil change every 5,000 miles or 6 months, whichever comes first. Additionally, the engine air filter should be replaced every 30,000 miles, the cabin air filter every 15,000 miles, and the brake fluid should be inspected every 30,000 miles. Tire rotation is recommended every 5,000 miles to ensure even wear. It's crucial to also check the hybrid battery and associated components during regular service.

If your 2014 Prius won't start, first ensure that the key fob is functioning and has a working battery. If the key fob is fine, check for any warning lights on the dashboard. If the 'Ready' light isn't illuminated, it may indicate that the hybrid battery is depleted. Try shifting the car into 'Park' and pressing the 'Power' button again. If the problem persists, it may be necessary to jump-start the vehicle or consult a qualified technician for further diagnostics.

To check the tire pressure on your 2014 Toyota Prius, first, locate the recommended tire pressure, which can be found on the driver’s side door jamb. Use a tire pressure gauge to measure the pressure in each tire when they are cold, as tire pressure can increase when they are hot. Adjust the pressure as needed by adding or releasing air. It's advisable to check tire pressure at least once a month and before long trips to ensure optimal performance and safety.

Common warning lights on the 2014 Toyota Prius include the check engine light, which indicates a potential issue with the engine or emissions system, and the hybrid system warning light, signaling a problem with the hybrid battery or system. The tire pressure warning light signals that one or more tires are under-inflated. If any warning light activates, it is advisable to consult the owner’s manual for specific guidance and consider visiting a dealer or certified mechanic for further inspection.

To reset the maintenance light on your 2014 Toyota Prius, turn the ignition to the 'ON' position without starting the engine. Press the trip meter button until the odometer displays the total mileage. Then, turn off the ignition. While holding down the trip meter button, turn the ignition back to 'ON' and continue to hold the button until the maintenance light flashes and then goes off. Release the button, and the maintenance light should now be reset.