Toyota 4Runner (2025) Owner Manual

The recommended maintenance schedule for the 2025 Toyota 4Runner includes an oil change every 5,000 miles or 6 months, whichever comes first. Additionally, you should check and replace the air filter every 15,000 miles, rotate the tires every 5,000 miles, and inspect the brakes at every oil change. Major services, like transmission fluid replacement and timing belt replacement, should be done at intervals specified in the owner manual, typically around 60,000 to 100,000 miles.

If a warning light appears on your dashboard, refer to the owner manual for specific information related to each light. Common warning lights include the check engine light, which may indicate a variety of issues, and the tire pressure monitoring system light, which suggests a tire may be under-inflated. To troubleshoot, first, check the vehicle's fluid levels and tire pressures. If the light persists, consider using an OBD-II scanner to read any diagnostic trouble codes or take your vehicle to a certified Toyota technician for a thorough inspection.

The 2025 Toyota 4Runner requires synthetic oil meeting the API (American Petroleum Institute) standards. The recommended viscosity is 0W-20, which provides optimal engine performance and fuel efficiency. Always check the owner manual for any specific requirements or updates regarding oil specifications, and ensure that the oil filter is replaced with every oil change to maintain engine health.

If your 2025 Toyota 4Runner won't start, first check the battery. Look for any corrosion on the terminals and ensure the battery is charged. If the battery is fine, check the fuel level and ensure that there is enough fuel in the tank. If the vehicle still does not start, listen for any clicking sounds when you turn the key, which may indicate a starter issue. If the problem persists, consult the owner manual for troubleshooting tips or contact a qualified Toyota service center for assistance.

To reset the maintenance light on your 2025 Toyota 4Runner, first, turn the ignition to the 'on' position without starting the engine. Next, press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. If it does not reset, consult the owner manual for further instructions or consider visiting a dealership for assistance. Regular maintenance reminders can also be set through the vehicle’s multimedia system.